Whether you have a sofa, an armchair, an ottoman or any other fine piece of furniture, you have to look carefully at how you’re going to get a slipcover ready. You must make sure your slipcover can fit over your furniture properly. You must look carefully at how well the cover can not only go over a surface but also be easy to secure without it slipping off, wrinkling or being otherwise hard to use. Make sure you use the right standards for getting such a cover ready on any kind of surface you want to get it on. This includes not only the size of the slipcover and the furniture but also the other features associated with the cover. Add a Few Inches on Each Side It helps to add a few inches onto your slipcover just to be safe. A few inches can be added on each end or side to make sure you have a large enough surface with a good fit that goes on each end. The key is to give you a comfortable look around your furniture. Check the Thickness You also have to look at how thick your slipcover as it can influence how well it can fit over the furniture. A slightly longer slipcover might be needed if you have a really thick surface to work with. This is just to ensure that the cover won’t snag up on a surface or be too hard to get on. Watch For Zippers and Other Items on Your Furniture Zippers, buttons and other commonplace accents on your furniture could add a bit of bulk onto that space. This could make it tough for you to get a futon slipcover applied in some cases. You might have to stretch the cover over some of these accents or add a bit of extra onto the cover so it will be a little easier for the material to go over that spot. Be certain that any accents around your furniture don’t get stuck onto your slipcover either. You have to allow the cover to stretch over properly without any of those extra things creating snagging that could cause the furniture under the cover to tear up. Look At Fasteners You might see some fasteners around some sides of a slipcover. This is especially the case if you have a more traditional dining chair that you want to cover. While fasteners can be useful to secure a strong fit onto any chair, you have to watch carefully at how well such fasteners might work. You have to see that they are actually going to cover the entire surface of your furniture. More importantly, you have to avoid being overly tight on one of these so you don’t risk damaging your furniture at any time. Check your slipcover carefully to see that it can go over your furniture without any problems. Be certain that you look at how well your great slipcover added onto your furniture. It should fit perfectly over your furniture without being overly tough or otherwise difficult to use in any situation.

The physical appearance of your slipcover isn’t the only thing you should look at. You should also look into how well it feels. As you sit on your furniture, you need a surface that is comfortable and enjoyable. It can offer a smooth body or even a cooling effect depending on what you choose. The options for fabrics for your slipcover can be rather appealing and worth looking into. Here are a few of the more commonplace choices you can get out of such fabrics. Traditional Cotton Cotton is a traditional material used on many slipcovers. It is light in weight and soft. It is also easy to wash. However, a lighter cotton application might also wear out quickly and may stretch with use. This leads to the second consideration that you can use for your custom pillow covers. Heavyweight Duck Cotton Heavyweight duck cotton is an option that is a little more advanced and powerful. This is a heavier option that may come with thicker fibers. It also offers an opaque look that is detailed and offers more support for a strong appearance. What makes it especially popular is that it is softer and retains that texture for a longer time. It could make a real difference when you are trying to add a slipcover that lasts for a longer period of time. Linens Mixed With Cotton Linens can be blended in together with a cotton base. The linen will become soft when you wash it. This is a comfortable choice that is relaxing and enjoyable but at the same time you might have to dry-clean your slipcover depending on how it is made. A tighter weave can be added into your cotton base as well. The weave can add a better look all the way through to establish a brilliant and appealing style all around. Can Canvas Work? Canvas can be used in some cases. Canvas materials are popular for how they offer thicker bodies and are cool to the touch. They are also strong enough to last for a long period of time. However, they may also be tough to clean off and can reflect light by a little too much. Canvas might not always look as professional as you might wish it could be. You’d have to be careful if you’re going to add any kind of canvas surface onto a sofa or other fabric. Silk Is For Low Traffic Situations Silk materials can be used on your slipcover. However, it is best to use silk when you’re got a piece of furniture that you don’t expect to use too often. While silk offers an elegant and smooth look, it is also very thin and can be easily scratched or wrinkled. It may also be tough to clean off as you might have to dry clean it. It is a frustrating fabric but it can look amazing if applied and used the right way. All of these fabric choices are good to look into when finding a great slipcover. These all come with their own features and care standards so make sure you compare each option to see what is right for you.

It is exciting to see what types of slipcovers are available for your use today. These include many slipcovers designed with a variety of great colors and patterns in mind. You might be surprised at how attractive these can be for all your uses. When finding great slipcovers, you have to choose options that come with colors that fit well in your home. An attractive option should blend in with the walls, the floor and other pieces of furniture in your room. It could contrast with other pieces if desired but the key is to simply have something that looks appealing. The color must also be one you are comfortable with. If anything, some custom slipcovers can allow you to dramatically change the appearance of your furniture. You can take a light-colored sofa and make it darker with a cover on top of it. With this in mind, you should look around to see what colors are available on today’s slipcovers. You might be surprised at some of the options that are available as well as related patterns. Traditional Colors Work Many of today’s slipcovers include a variety of brown, tan and white colors. These match up with the traditional colors you come to expect out of typical sofas and other pieces of furniture. These blend in well in most rooms and don’t create anything far too outlandish or unusual in such a spot. What About Special Colors? Blue and red are the most common special colors you can come across when finding great slipcovers. These colors are popular for being eye-catching and for offering dark or light tones depending on the shade. Many slipcovers can come with such appealing tones. Slight Damask Effects Can Be Added One pattern to see on a cover is a damask tone. This works with a small series of woven features on its body. These add a few intricate lines that are easy to notice but aren’t necessarily going to stand out or protrude far too much. They will simply blend in with the rest of the furniture to create a nicer overall appearance. A typical floral pattern can be found in such a damask slipcover. This adds an intricate look that establishes a series of fine lines without being too elaborate. Heirloom Patterns Are Prominent An heirloom pattern uses a series of patch-like accents all around the body of a slipcover. The patches are varied in color but they will all fit around the same end of the color spectrum. For instance, a cover may come with a series of red patches that mix well with white ones. A Lattice Pattern Works You can also get a lattice pattern on your slipcover. It features a series of lines scattered around the body of your cover. These can mix in well with any color and will create a repeating pattern with lines forming a series of squares or diamonds among other shapes. All of these options for colors and patterns are worth noticing for your slipcover. Take a look around to see what you feel might fit perfectly on your sofa or other piece of furniture you want to add it onto.

The problem with trying to get new furniture in your home is that it might be far too expensive to buy. This is especially the case with your sofa. Such a large piece of furniture will cost a great deal of money to acquire. Even with this in mind, your existing sofa might still be comfortable and sturdy. You can always get a new sofa slipcover installed over your existing furniture. A slipcover will transform the look of your furniture to provide you with a more beautiful look all the way through. How Is It Made? A sofa slipcover is made to help create a soft and flexible cover over your sofa’s original surface. It establishes a beautiful color and a soft texture. The goal of the cover is to create a totally new look to your sofa. A slipcover is made with several parts in mind. One part is designed to go over the main body of the sofa. The other parts are for individual cushions. These include not only the ones you sit on but also the ones for the back of your sofa. Check on the specific slipcover model you order to see what pieces are included so you’ll have full coverage. How Does It Feel? The texture of your sofa slipcover will be a perfect replacement for the original texture of your sofa provided it has worn out and weakened over time. A great slipcover is made with a fine polyester surface that lasts for years. It will be thick and soft while being easy to clean off in a washing machine. It is also thick enough to ensure that the inside part of the furniture will not be hurt. How Does It Look? A slipcover, when installed properly, will give you an impressive look to have over your furniture. It will feature a brilliant color that fits in with other surfaces in your home. You can find many slipcovers that come with tan, brown or red shades among others. Some slipcovers include a few special patterns. These include lattice features with a series of interlocking lines. Make sure when choosing a slipcover that you opt for one that features a great look that fits in with your furniture and everything else in your room. How Do You Install It? A slipcover can be added onto a sofa with ease. First, you’d have to find a proper option that fits over your sofa. This includes a choice that can fit over a box or T-cushion-shaped model. You can also tumble-dry your slipcover before installed it so any wrinkles it develops while in storage or in its packaging can be removed. You’d have to remove the cushions from your sofa and then move the slipcover over the sofa. Check the cover’s labels to find where you need to get it draped over. The fabric should be properly pulled all the way through to the corners of the furniture. This is to create a smooth surface with nothing slipping over it. Any excess fabric may be added into the crevices in your furniture as a means of keeping the cover in its place. The cushions should be secured with their own separate covers. Use the same rules for adding them onto each cushion. A Great Option Once you get your sofa slipcover installed, you will have a beautiful and consistent new look on your furniture. It not only protects the body of your furniture but also has a comfortable body. Make sure you look at this when finding a great way to make your furniture look its best while staying relaxed.